A set of 8 new Bosch Glow Plugs for 1994-2003 7.3L Ford Powerstroke vehicles.
- -Bosch patented Duraterm?? technology enables the glow plug to reach higher temperatures quicker for fast engine start-up
- -Nickel-plated rolled threads for increased strength and prevent seizure
- -Twin Viton?? seals Promote longer life by protecting the coils against damage caused by exhaust gases
Unlike gasoline engines which use a spark plug to ignite an air/fuel mixture, diesel engines rely on the heat of highly-compressed air to ignite a precise amount of fuel to initiate combustion. Heating the air to a minimum starting temperature of 850???C is critical for diesel engine start-up.???In low temperatures, factors such as cold intake air and cold cylinder walls hinder the attainment of the necessary starting temperature. In these situations, glow plugs function as an additional heat source to bring the intake air up to the temperature necessary to initiate the combustion cycle.
Bosch's revolutionary Duraterm glow plug technology utilizes a self-regulating control system that reduces glow wait time by more than 50%. The patented dual-control regulating and heating coil effectively directs current draw, enabling the glow plug to reach higher temperatures more quickly for faster engine start-up. The regulating coil keeps the heating element within the 1000*-1100*C optimal temperature range, preventing engine damage due to over voltage/overheating.
The following signs could indicate that its time to change a vehicles glow plugs.
-Vehicle wont start at all-Vehicle starts only after excessive cranking-Excessive cranking can cause the engine oil to be diluted with fuel, which could adversely effect the life of the engine.-Vehicle idles roughly after initial start-up-Excessive exhaust emissions after initial start-up.
Excessive voltage is the leading cause of glow plug failure. Glow plugs are designed to operate within a temperature range of 850*-1100*C. During operation, the glow plug controller switches current to the glow plug for a specific period of time to allow for proper heating. However, when the controller fails, current could be applied for a longer than specified time causing the temperature of the glow plug to exceed the 1100*C upper limit. Under these conditions, the glow plug overheats causing the casing to swell, split or burst which allows air to enter the coil area causing immediate failure. If one glow plug fails, chances are the others wont be far behind. To minimize vehicle down-time and save on labor costs, Bosch recommends changing all glow plugs at the same time.