Archoil AR9100 Nanoborate Friction Modifier
- GET RID OF YOUR STICTION PROBLEMS WITH A SMARTER, CHEAPER OPTION!
- A 16 oz. bottle does one oil change! 1/2 the cost of competitive products.
The main purposes of AR9100 are to reduce friction and wear, maintain a deposit free fluid system, extend component life, and to dissipate frictional heat.
AR9100 Nanoborate reduces friction to coefficients of 0.037, half again the friction coefficient of ‘micro boron’, and a fraction of traditional lubricants like zinc, phosphorous and other additives presently used in popular oil and grease formulations.
AR9100 contains various esters which dissolve carbon and varnish, a solution for POWERSTROKE 6.0L injector stiction, which is the accumulation of carbon and varnish deposits in the injector spool valve resulting in a performance drop, hard starts, drop in fuel economy, injector failure, etc. AR9100 resolves these problems.
AR9100 also has several times the load capacity of ‘micro boron’ and far more than traditional chemistries, testing at up to 4000 lbs on the Falex Pin & Vee Block test.
AR9100 is introduced into the oil and the esters totally dissolve all deposits allowing the nanoborate to form a strong chelate bond, the esters also enhance the lubricant for increased performance. Friction wear is reduced over 75%.
AR9100 greatly exceeds the challenges presented by today’s tightened fluid system tolerances, and the significant reduction in friction also has the highly desirable side effect of increasing the system’s fuel efficiency. Nanoborate lubrication reduces the amount of energy required to operate the system.
For 6.0L Injector Stiction Issues- Use One bottle per oil change.